INS · CCGT
Close

Toolhelix›ISO insert code›CCGT 060202

CCGT 060202

What CCGT 060202 means, letter by letter: rhombic 80°, positive, 7° clearance, tolerance G, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 6.35 mm, thickness 2.38 mm, nose radius 0.2 mm.

1 · SHAPERhombic 80°C
2 · CLEARANCE7°C
3 · TOLERANCEClass Gtight, ground
4 · TYPET40–60° countersunk hole, chipbreaker one side
5 · SIZE06inscribed Ø 6.35 mm · cutting edge 6.4 mm
6 · THICKNESS2.38 mm02
7 · NOSE RADIUS0.2 mm02
IC 6.35s 2.38clearance 7°rε 0.2
To scale: top view with the inscribed circle (blue dashes) and, on the right, the side view with the thickness. The grey dashes mark the chipbreaker; its real shape is up to the manufacturer.

CCGT 060202 dimensions

Inscribed circle IC6.35 mm
Cutting edge length6.45 mm
Thickness s2.38 mm
Nose radius rε0.2 mm
Corner angle80°
Clearance angle7°
Tolerance G: IC / corner height / thickness±0.025 / ±0.025 / ±0.13 mm

What CCGT 060202 tells you on the shop floor

80° corner: strong yet versatile, turns and faces with the same insert.

Positive insert (7°): lower cutting forces and less chatter. For finishing, boring, thin-walled parts and lighter machines.

Ground: a more precise edge, repeatable at every insert change. The choice for finishing and tight tolerances.

Small radius: lower forces and chatter, good finish at low feed.

Typical holders for CCGT

For a positive rhombic 80° insert the most common ISO 5608 holders are:

The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.

Other CCGT sizes

Same size, other version

← CCMT 120408CCGT 060204 →

Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.

Got another code? Type it into the decoder and read it at once.

Open the decoder

Frequently asked questions

What does CCGT 060202 mean?

CCGT 060202: rhombic 80°, positive, 7° clearance, tolerance G, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 6.35 mm, thickness 2.38 mm, nose radius 0.2 mm.

What is the inscribed circle of CCGT 060202?

6.35 mm, with a 6.4 mm cutting edge.

Which holder takes CCGT 060202?

An ISO 5608 holder for positive rhombic 80° inserts, for example SCLCR/L or SCACR/L.

Was this useful? Buy Toolhelix a coffee and help us build the next tool.

Versione italiana · Deutsche Version