What RCMX 3209M0 means, letter by letter: round, positive, 7° clearance, tolerance M, special. Inscribed circle 32 mm, thickness 9.52 mm, metric round, no nose radius.
R1C2M3X4325096M07
1 · SHAPERoundR
2 · CLEARANCE7°C
3 · TOLERANCEClass Mmedium, pressed
4 · TYPEXSpecial
5 · SIZE32inscribed Ø 32 mm
6 · THICKNESS9.52 mm09
7 · ROUNDmetric round, no nose radiusM0
To scale: top view with the inscribed circle (blue dashes) and, on the right, the side view with the thickness. No chipbreaker: flat rake face.
RCMX 3209M0 dimensions
Inscribed circle IC
32 mm
Thickness s
9.52 mm
Clearance angle
7°
Tolerance M
thickness ±0.13 mm
What RCMX 3209M0 tells you on the shop floor
Round insert: maximum strength and many cutting positions. Heavy roughing and tough materials.
Positive insert (7°): lower cutting forces and less chatter. For finishing, boring, thin-walled parts and lighter machines.
Pressed, medium tolerance: economical, fine for roughing and where you do not need repeatability to a few hundredths of a mm at every insert change.
Typical holders for RCMX
For a positive round insert the most common ISO 5608 holders are:
SRDCN
The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.
Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.
Got another code? Type it into the decoder and read it at once.
What problem it solved, how much time it saves you, what is missing. We read everything. We only publish with your permission, and only the way you choose.
Thank you. We have it: if you allowed publishing, we will write to you to confirm before it goes online.