VBMT 110302 dimensions
| Inscribed circle IC | 6.35 mm |
| Cutting edge length | 11.07 mm |
| Thickness s | 3.18 mm |
| Nose radius rε | 0.2 mm |
| Corner angle | 35° |
| Clearance angle | 5° |
| Tolerance M | IC ±0.05 · corner height ±0.16 · thickness ±0.13 mm |
What VBMT 110302 tells you on the shop floor
35° corner: reaches into grooves and complex profiles, but the edge is fragile. Light cuts only.
Positive insert (5°): lower cutting forces and less chatter. For finishing, boring, thin-walled parts and lighter machines.
Pressed, medium tolerance: economical, fine for roughing and where you do not need repeatability to a few hundredths of a mm at every insert change.
Small radius: lower forces and chatter, good finish at low feed.
Typical holders for VBMT
For a positive rhombic 35° insert the most common ISO 5608 holders are:
- SVJBR/L · lead angle 93°
- SVVBN · lead angle 72.5°
The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.
Other VBMT sizes
Same size, other version
Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.